Full Tear-Off and Disposal
We remove the old siding, haul it away, and recycle what we can. The sheathing gets inspected for rot and water infiltration before anything new goes up. Disposal is included in the price, not billed as an extra.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
5+ Years Trusted in Oklahoma City
What Our Insulated Siding Package Covers
Every insulated siding job includes the tear-off, the weather barrier, the panels, and the trim. Here is exactly what shows up on your scope, plus the add-ons we price separately if your house needs them.
House Wrap and Flashing
New or repaired house wrap goes on with taped seams, and we re-flash every window and door opening. This is the layer that keeps Oklahoma rain out of your walls, and we do not skip it to save a day.
Insulated Panels and Trim
Foam-backed panels in your chosen profile and color, plus matching corner trim, J-channel, and starter strips. We use stainless or hot-dip galvanized fasteners so nothing rusts behind the wall.
Caulk and Finish Work
Every joint gets a paintable sealant rated for Oklahoma temperature swings. We finish the corners, soffits, and around penetrations, then walk the house with you before we leave.
Warranty Registration
We register the manufacturer warranty in your name and hand you the paperwork, plus our own five-year workmanship warranty. If a panel ever comes loose from our installation, we come back and fix it.
What Insulated Siding in Oklahoma City Actually Does
Insulated Siding in Oklahoma City is exterior cladding with a contoured foam layer bonded to the back of each panel. That foam fills the uneven gaps over your old sheathing and adds a continuous thermal break, usually R-2 to R-5 depending on the product. We pull the old vinyl, inspect the house wrap and flashing, then nail new panels with a siding nailer set to the right depth so the foam never gets crushed.
Oklahoma City swings from 105-degree July afternoons to single-digit January mornings, and that expansion and contraction is what kills cheap siding. Insulated panels absorb that movement instead of cracking and peeling. We also see plenty of hail damage across 73114 and 73118, and the foam backing gives the panel something solid to push against. If you have been searching for energy efficient siding Oklahoma City homeowners actually keep, this is the product.
How Our Insulated Siding Installation Runs
We keep the job predictable: one crew, one schedule, and a walkthrough before we ever touch a panel. Here is the five-step sequence from first call to final cleanup.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and Methods Behind Our Insulated Siding Work
Tools & Equipment
Siding Nailer
Drives nails to the manufacturer's depth without crushing the foam backing. We set the depth on a test board before every job so panels stay loose enough to move with the wall.
Circular Saw and Tin Snips
Cut panels to length and shape around windows, doors, and vents. Tin snips handle the fine trim work where a saw would chip the finish.
Chalk Line and Level
Keep every course dead level and every corner plumb. A wavy first course shows up at the roofline, so we set it right before nailing anything.
Caulk Gun and Utility Knife
Seal joints with paintable sealant and trim panels cleanly at penetrations. We use a sealant rated for Oklahoma temperature swings, not the cheap stuff.
Pry Bar and Siding Gauge
Remove old panels without damaging the sheathing and set the correct reveal on each course. The gauge keeps the exposure consistent across the whole wall.
Hammer and Insulation Board
Set flashing and add rigid insulation board on homes that need extra R-value behind the panels. We tape the seams so the thermal break stays continuous.
Methods & Standards
Vinyl Siding Institute Installation Standards
We follow the VSI published specs for nailing, clearance, and panel overlap. Nails go in the center of the slot, loose enough that the panel can move with temperature changes. That single detail is why our panels do not buckle in July.
James Hardie Elite Preferred Installation
For fiber cement jobs, we follow James Hardie's published clearances and fastening schedule. That keeps the 30-year finish warranty valid and gives you a wall that handles Oklahoma hail without cracking.
EPA Lead-Safe Renovation
Homes built before 1978 get the full lead-safe protocol: containment, HEPA vacuuming, and proper disposal. Historic Capitol Hill and Stockyards City have plenty of pre-1978 housing, so this is standard practice for us.
Flashing and Water Management
We re-flash every window and door opening and install J-channel with the correct weep path. Water gets out the way it came in, which prevents the mold and rot we see behind failed siding every year.
When Oklahoma City Homeowners Call Us for Insulated Siding
01
A 1960s ranch in the Asian District with original sheathing and a west wall that bakes all afternoon.
What we do: We tear off the old cladding, repair two soft spots in the sheathing, add new house wrap, and install insulated panels in a matching profile. The job takes four working days.
→ The upstairs stays 8 to 10 degrees cooler in July, and the electric bill drops noticeably by the second billing cycle.
02
A Bricktown home that took hail damage on the north and west walls last spring.
What we do: We document the damage, meet the insurance adjuster on site, and replace the damaged sections with foam-backed panels matched to the existing color and profile.
→ The claim covers the repair, the walls take the next storm better, and the homeowner avoids a full-house replacement.
03
A 1948 bungalow in Historic Capitol Hill with wavy walls, drafts, and peeling paint.
What we do: We remove the failing siding, replace rotted sheathing, and install insulated fiber cement panels with new flashing and trim. EPA Lead-Safe protocols apply because of the home's age.
→ The house looks straight and tight, drafts are gone, and the new paint finish should hold 10 to 15 years.
04
A rental property near Uptown 23rd where the owner wants lower turnover and better energy performance.
What we do: We install insulated vinyl panels in a neutral color, upgrade the house wrap, and add new caulk lines at every opening. The work happens between tenants in under a week.
→ Tenants report lower utility bills, the owner gets fewer maintenance calls, and the property holds its curb appeal.
How Insulated Siding Performs in Oklahoma City Conditions
Oklahoma City sits in a hail alley and a freeze-thaw zone at the same time, which is hard on exterior cladding. Summer afternoons push past 100 degrees, January mornings drop into the teens, and the wall expands and contracts through both. Insulated panels handle that swing because the foam absorbs movement the way bare vinyl cannot. We also deal with Oklahoma County's older housing stock, where original sheathing has settled and the house wrap has long since failed. That is why we inspect and repair the weather barrier before installing anything new. If you have been looking for insulated siding replacement Oklahoma City that actually lasts, the prep work matters as much as the panels. We also coordinate with insurance adjusters after hail events, since a foam-backed wall often survives damage that destroys standard vinyl.
Neighborhoods We Serve
-
Bricktown
Mix of newer lofts and older brick homes. We often install insulated panels on the side and rear walls where the sun hits hardest and the original cladding has failed.
-
Historic Capitol Hill
Plenty of pre-1978 housing with settled sheathing. EPA Lead-Safe protocols apply, and we usually find rotted wood behind the old siding that needs replacing first.
-
Uptown 23rd
Busy corridor with traffic noise. Homeowners here notice the sound deadening from foam-backed panels more than anywhere else in the metro.
-
Asian District
Mid-century ranches with west-facing walls that bake in July. Insulated panels cut the heat load and drop summer cooling costs noticeably.
-
Stockyards City
Older homes near the stockyards deal with dust and wind-driven rain. We pay extra attention to flashing and caulk lines on the exposed sides.
Local Conditions We Plan For
-
Hail events every spring across Oklahoma County
Bare vinyl cracks and needs full-wall replacement. Foam-backed panels flex and survive, which keeps repair costs and insurance claims smaller.
-
Freeze-thaw cycles from November through March
Walls expand and contract daily. Insulated panels move with the wall instead of buckling, and the foam keeps the thermal break intact.
-
Summer heat above 100 degrees
West and south walls radiate heat into the house all afternoon. The foam backing blocks that transfer and cuts cooling costs 10 to 20 percent.
-
Wind-driven rain from the north and west
Water finds every failed caulk joint. We re-flash openings and use a sealant rated for Oklahoma temperature swings so the wall stays dry.
Bricktown Hail Damage to Insulated Panels
Problems Insulated Siding Solves for Oklahoma City Homes
Most of our calls start with one of these four problems. Here is what causes them and how we fix them.
Problem
High summer cooling bills on west-facing walls
Bare siding lets the afternoon sun drive heat straight through the wall, so your AC runs longer and your electric bill climbs every July and August.
Our Fix
We install foam-backed insulated panels that add a continuous thermal break across the whole wall. Most Oklahoma City homeowners see a 10 to 20 percent drop in cooling costs, with the biggest gains on west- and south-facing rooms.
Problem
Hail damage and cracked vinyl panels
Bare vinyl shatters on impact, and Oklahoma County gets hail every spring. One storm can mean a full-wall replacement and an insurance claim.
Our Fix
Insulated panels flex under impact instead of cracking. We document existing damage, meet your adjuster, and install foam-backed panels that take the next storm far better than the old cladding.
Problem
Water infiltration and soft sheathing
Failed flashing and old caulk let rain behind the siding. The sheathing rots, mold grows, and the repair bill triples if you wait.
Our Fix
We tear off the old siding, replace the house wrap, re-flash every opening, and install insulated panels with proper clearance. Water drains the way it should, and the wall stays dry.
Problem
Warped, wavy walls on older homes
Settled sheathing and decades of expansion leave walls that look lumpy and let air leak around every seam.
Our Fix
The foam backing bridges those dips and waves, so the finished wall reads flat and tight. We also seal the seams, which cuts drafts on the 1940s and 1950s homes common in Historic Capitol Hill.
Why Oklahoma City Homeowners Upgrade to Insulated Panels
Insulated siding does three jobs at once: it cuts heat transfer, stiffens the wall against impact, and quiets the house. Here is what that looks like on a real Oklahoma City home.
-
Lower Energy Bills
The foam backing adds a continuous R-value across the whole wall, not just between the studs. Most Oklahoma City homeowners we work with see a 10 to 20 percent drop in summer cooling costs after insulated siding replacement Oklahoma City, because the attic-facing and west-facing walls stop radiating heat into the rooms.
-
Hail and Impact Resistance
Foam-backed panels flex instead of cracking when hail hits. After the last big storm cycle through Oklahoma County, we replaced hundreds of bare vinyl panels that shattered on impact. Insulated panels took the same hits with dents you can barely see, which keeps insurance claims and repair bills down.
-
Quieter Rooms
That same foam layer deadens outside noise. Homes near I-235, the Bricktown rail lines, and busy corridors like NW 23rd notice it first. Customers in Uptown 23rd tell us they stopped hearing traffic at night, and one family near the Plaza District said the dog quit barking at every truck.
-
Straighter, Warmer Walls
Insulated panels bridge the dips and waves in older sheathing, so the finished wall looks flat and tight. That matters on the 1940s and 1950s housing stock around Historic Capitol Hill and Stockyards City, where original sheathing has swelled and settled for decades. No wavy lines, no gaps at the corners.
Licensed, Insured, and Warrantied
Licensed & Certified
- State of Oklahoma Contractor License — issued by Oklahoma Construction Industries Board
- EPA Lead-Safe Certified Firm — issued by U.S. Environmental Protection Agency
- Vinyl Siding Institute Certified Installer — issued by Vinyl Siding Institute
- James Hardie Elite Preferred Contractor — issued by James Hardie Building Products
- Mastic Preferred Contractor — issued by Mastic Home Exteriors
Verified Reviews
Google ★★★★★4.9
Elite Siding OKC replaced our hail-damaged vinyl with insulated panels in four days. They handled the insurance paperwork and matched the color perfectly. The upstairs is noticeably cooler and quieter. Fair price, clean crew, no surprises.
Yelp ★★★★★4.8
We had three estimates and Elite was the only one that inspected the sheathing before quoting. They found rotted wood behind the old siding, showed us photos, and priced the repair upfront. The finished wall looks great and the drafts are gone.
BBB ★★★★★4.9
Professional from the first call. Measured the house, explained the difference between standard and insulated panels, and gave us a fixed price the same day. Crew showed up on time every morning and cleaned up completely.
Google ★★★★★5.0
Our 1948 house in Capitol Hill had wavy walls and peeling paint. Elite replaced the sheathing, re-flashed the windows, and installed insulated fiber cement. The house finally looks straight and the July electric bill dropped about $70.
Five Years of Siding Work in Oklahoma County
Elite Siding OKC has been installing exterior cladding since 2021, and insulated siding has been a core part of that work from the start. Our crews are trained on James Hardie, LP SmartSide, CertainTeed, Mastic, and Alside systems, and we follow Vinyl Siding Institute installation standards on every panel. We have completed hundreds of Oklahoma City projects, from single-wall repairs to full-house replacements, and we carry the State of Oklahoma contractor licensing and EPA Lead-Safe certification required for pre-1978 homes.
- James Hardie Elite Preferred Contractor trained on fiber cement and insulated panel systems.
- Vinyl Siding Institute Certified Installer following published nailing and clearance specs.
- EPA Lead-Safe certified for pre-1978 homes common in Historic Capitol Hill and Stockyards City.
- OSHA-compliant crews with fall protection on every two-story Oklahoma City job.
- State of Oklahoma contractor licensed and fully insured for residential exterior work.
What Oklahoma City Customers Say
Real experiences from customers who chose our Insulated Siding services.
“We had bare vinyl that cracked every time it hailed. Elite Siding OKC swapped the whole west wall for insulated panels and the difference in the upstairs bedrooms is real. July electric bill dropped about $60. Crew was in and out in four days and cleaned up every nail.”
M
Marcus T.
Homeowner, Bricktown
“Our 1948 house had wavy walls and a draft you could feel. They fixed the rotted sheathing, added the foam-backed panels, and the house finally looks straight. The noise from 23rd Street is gone too. Honest pricing and they showed me photos of everything they found.”
D
Dana R.
Homeowner, Uptown 23rd
“After the last hailstorm, three neighbors had shattered siding and we had two small dents. The insulated panels took the hit. Elite handled the insurance paperwork and matched the color on the one panel that needed replacing. I would use them again without question.”
K
Kevin N.
Homeowner, Asian District
Questions Oklahoma City Homeowners Ask Us
Real answers to the questions we hear most often from local homeowners and property managers.
How much does Insulated Siding Installation cost in Oklahoma City OK?
Most full-house insulated siding installations in Oklahoma City run $9 to $16 per square foot installed, or roughly $14,000 to $28,000 for a typical 1,800-square-foot home in 2026. The foam backing adds about $1 to $2 per square foot over standard vinyl. Two-story walls, complex trim, and rotted sheathing repairs push the number up. We give you a fixed written price after the on-site measure.
Does insulated siding lower energy bills in Oklahoma City?
Yes. The continuous foam layer adds R-2 to R-5 across the whole wall, which most Oklahoma City homeowners see as a 10 to 20 percent drop in summer cooling costs. Winter heating savings run smaller but real, usually 5 to 10 percent. The biggest gains show up on west- and south-facing walls that bake all afternoon in July.
What is the R-value of insulated siding in Oklahoma?
Insulated siding typically carries an R-value of R-2 to R-5, depending on the foam thickness and the panel system. That is added on top of your existing wall insulation, not instead of it. James Hardie and Mastic both publish tested R-values for their insulated lines, and we spec the thicker foam on homes with minimal wall cavity insulation.
Who installs insulated siding in Oklahoma City?
Elite Siding OKC installs insulated siding across Oklahoma City and Oklahoma County, including Bricktown, Midtown, the Asian District, and Historic Capitol Hill. We have been in business since 2021 and carry State of Oklahoma contractor licensing plus EPA Lead-Safe certification. Call (405) 931-0174 for a same-week estimate.
Other Siding Services We Handle
Vinyl Siding
Standard vinyl is the budget option, and we install it on rentals and outbuildings where insulation is not the priority. If you want the same look with better thermal performance, we upgrade you to foam-backed insulated panels in the same color and profile.
View Vinyl SidingFiber Cement Siding
Fiber cement boards like James Hardie pair well with insulated backing on Oklahoma City homes that face heavy hail. The cement skin takes impact, the foam absorbs it, and you get a 30-year paint finish that holds up to Oklahoma sun.
View Fiber Cement SidingWood Siding
Cedar and engineered wood look great but rot fast in Oklahoma humidity. We often replace failing wood siding with insulated panels that mimic the same grain and shadow lines, so you keep the curb appeal without the annual staining.
View Wood SidingAluminum Siding
Older aluminum siding dents easily and offers almost no R-value. We remove it, inspect the sheathing, and install insulated panels that stop the denting and add a real thermal break to your walls.
View Aluminum SidingMetal / Steel Siding
Steel panels are tough and fire-resistant, and we back them with insulation board on Oklahoma City homes near wooded lots. The combination cuts noise, reduces condensation, and gives you a wall that stands up to hail without cracking.
View Metal / Steel SidingStone Veneer Siding
Stone veneer on the lower half of a house pairs nicely with insulated panels above. We flash the transition carefully so Oklahoma rain cannot get behind the stone, and the foam-backed upper walls stay warm and tight.
View Stone Veneer SidingContact Elite Siding OKC
Call (405) 931-0174 or send us a note and we will get back to you the same business day. We answer the phone from 8 a.m. to 6 p.m. Monday through Friday, and we check messages on weekends. Free estimates across Oklahoma City and Oklahoma County.
Elite Siding OKC
-
Phone
(405) 931-0174 -
Address
3150 W Memorial Rd Suite 210-186, Oklahoma City, OK 73134
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available